Category
FVMQ tops out near 200°C / 392°F and FKM holds 250°C / 480°F longterm: see the fuel, tear strength, and cold soak…
Fluorosilicone release coatings top out near 175 to 200°C / 350 to 390°F on tooling; structural hot zones above 177°C / 350°F…
Fluorosilicone coatings cap out near 200°C / 392°F. See the failure modes, depot process limits, and how GREOS ENDURE FKM coating reaches…
FVMQ material properties on a datasheet come from unaged slabs at 23°C / 73°F. See why compression set, fuel swell, and aging…
Fluorosilicone coating hardens above 200°C / 392°F while GREOS ENDURE FKM coating holds 250°C / 480°F with flexibility fluorosilicone can't match.
FVMQ O-ring temperature range runs -73°C / -100°F to 177°C / 350°F, fails against Skydrol, and needs ASTM D395 compression set data…
Radar absorbing material loses its designed reflectivity when the topcoat degrades: see why GREOS ENDURE FKM coating holds 250°C / 480°F without…
Polyurethane topcoats over radar-absorbing material fail above 177°C / 350°F. See why FKM and FFKM topcoats hold 250°C / 480°F to 350°C…
Radar absorbent material fails from the topcoat down. See the failure mechanisms by RAM class and the 250°C / 480°F FKM coating…
Radar absorbing materials only hold their tuned RCS answer if the topcoat above them survives thermal cycling. See where polyurethane and silicone…